Skip to content
Redmoon Calculators
写作工具 All languages

Cosplay Fabric & Material Estimator

免费cosplay布料用量计算器。根据简单的身体尺寸和布幅估算披风、百褶裙、紧身衣、肩甲和护手所需的布料或EVA泡沫。

何时使用

Use before ordering fabric for a new cosplay piece. Always order a bit more than the estimate suggests — cuts and seams eat fabric.

与其他指标对比

Pattern instructions give exact yardage per pattern. This is for the planning stage — when you're deciding which fabric to buy, not how to cut it.

Enter your values below. Calculations run locally as you type.

工作原理

Each garment preset uses simplified geometric estimates — full-circle cape ≈ π × radius², bodice = two flat panels, etc.

Required length is the safe area (estimate × 1.1 for waste) divided by your bolt width.

Always buy a bit more than the estimate — fabric mistakes compound quickly.

常见问题

How accurate are these estimates?

They're approximations using simplified geometry plus a 10% safety margin. Always buy a bit more for mistakes.

Does it work for EVA foam?

Yes — set the bolt width to your standard foam sheet (often 60 cm × 100 cm).

Why does bolt width change how much fabric I need?

Wider bolts let more pattern pieces sit side by side, so a piece that needs two lengths on a 45-inch bolt may fit in one length on a 60-inch bolt. Always check the bolt width before buying so you do not overpay for yardage.

Should I add extra fabric beyond the estimate?

The built-in 10% margin covers seam allowances and small mistakes, but add more if your fabric has a directional nap or a pattern that must be matched at the seams. Plaids, stripes, and pile fabrics like velvet can require 15 to 25% extra.

示例

输入

Full circle cape, 170 cm height, 60-inch (152 cm) bolt.

输出

~5 meters needed.

A full-circle cape with a 170 cm radius needs π × 170² ≈ 9 m² of fabric. At 1.52 m bolt width plus 10% safety margin, that's ~6.5 m of length — round to 7 m to be safe.

常见陷阱

  • Geometric estimates only — complex pattern pieces need a real pattern.
  • Bias-cut cape uses more fabric than a straight-grain cut.
  • EVA foam thickness and waste from carving aren't modeled.

相关工具

发送反馈

我们会阅读每一条消息。告诉我们可以改进什么或你喜欢什么。